YaMoRC YD6016RB-CS

The YD6016RB-Cs is designed to work with the ROCO z21 and Z21 on the R-Bus port. Our standard current-sensing feedback module with RBus / XBus Interface It presents: 16 current-sensing detectors, arranged in two independent blocks of 8, each with their own Common 2 Amp continuous current per detector, 8 Amps in total combined over the 16 detectors on the whole module 5 Amp short duration overload (100ms) capable per detector. 1mA current sensitivity Capacitive input filter on every input, to suppress noise on long cables and track-sections Configurable on- and off-delay setting for each input for optimal de-bouncing in case of non optimal wheel-track contact Every input individually configurable for various actions like feedback, turnout toggle, turnout throw, turnout close Every input individually configurable for turnout-address ES-IN-Link for direct connection of up to 4 additional YD6016ES modules (effectively creating a 80 input RBus module) ES-IN-Link connection to other ES-Link enabled modules for module-configuration ES-IN-Link connection to YD9101 for web-based configuration USB connection with one Virtual COM port for the YD.Command protocol Firmware updatable over USB Power supply directly from RBus / XBus ( or USB for easy configuration and updating on a PC )